Polaris BIOS Editor 1.6.7 (1.7.2) download

Polaris BIOS Editor version 1.6.7 (1.7.2) - A program for regulating timings in bios for flashing a video card. Used for memory of any type. Timing changes are used to increase performance when mining cryptocurrencies. Polaris BIOS Editor is accompanied by special instructions.

Polaris BIOS Editor

Version Polaris BIOS Editor 1.6.7, can be downloaded by simply clicking on the button just below.


You can also download apply the latest version PBE 1.7.2.


There are also paid versions of the program under consideration - pro 3.0 and 3. There is no need to buy them, since versions 1.6.x and 1.7.x are simpler, designed for beginners and it is quite easy to deal with them.

Benefits of the new PBE 1.6.7 compared to earlier 1.4 series programs

It is considered universal. In other words, it is suitable for any type of memory. In cases where PBE is not supported by the hardware, it is necessary to update the framework to the latest version.

If something doesn't work with utility 1.7.2, you need to use PBE 1.6.7.

The product is able to independently select timings in an automatic mode in accordance with the existing memory type of the equipment used, therefore it is an indispensable assistant for beginners. Even in those rare cases when the system can make the wrong choice (which happens extremely rarely), it is always possible to change the timing manually.

Version updates PBE 1.7.2:

  • improved timing for some types of memory (hynix, elpida);
  • the interface was updated;
  • rx 590 support implemented.

Version updates PBE 1.6.7:

  • updated timings for micron memory were used;
  • online check of updated versions is provided;
  • added new devices.

How to use PBE

It is quite simple to start using the program: you need to download it, unpack it, specify the address for storing the program and run the file.

Need to click Open bios in the upper left of the computer. The firmware opens - it is here that the timings are reflected.

You can figure out how to correctly set the timings in automatic or manual mode by watching the video below.

To configure the parameters after opening the firmware, you need to do two things:

  • press One click timing patch - timings are automatically edited;
  • press Save as - the firmware has been saved.

The versions of PBE offered for download in this article are verified from the official source and are completely safe for PC.

To change the voltage, you must use the settings gpu и memory. However, for beginners who have a poor understanding of what they are dealing with, it is better not to apply these parameters.

target temperature - the temperature regime, regulated by increasing the cooler power or lowering its frequencies, which is much less common in practice.

power control limit - used in cases where there is no desire to apply afterberner. It is identical Power limit, you need to work with him on the same principle.

If you need to turn on the fan, you need to use the settings in the column fan. If the fan does not work at all during downtime, you must make changes to min pwmby changing the indicators to positive.

Additional shaders can be unlocked through SRBPolaris. The setting does not apply to all cards.

Like this article? Share with friends:
Torrent4you

;-) :| :x : Twisted: : Smile: : Shock: : sad: : roll: : Razz: : Oops: :o : Mrgreen: : Lol: : Idea: : Grin: : Evil: : Cry: : Cool: : Arrow: : ???: :?: :!: